Vulcan Pipe and Duct Solutions. Powered by Gaus-Scott, bane of Noise everywhere!
Our Vulcan Industrial pipe and duct lagging product line offers a significant reduction of radiated noise from HVAC duct casings. Round or rectangular applications can be accommodated as well. If sound absorption and thermal insulation are things that interest you, see the offerings we have below!
Pipe & Duct Wrap
Our Vulcan Industrial Pipe and Duct Wrap is a flexible 1 lb or 2 lb per square foot reinforced foil-faced faced mass loaded vinyl noise barrier. It is typically used to wrap noisy pipes and ducts to block the noise that transmits through the walls of the pipe or duct as air or other contents move through it as well as to increase the sound absorption in the cavity.
The reinforced foil-faced exterior serves as a protective jacket for indoor or outdoor applications. It is different from, and often used in conjunction with, a duct liner that is installed inside a duct to reduce noise exiting from downstream registers and vents.
Acoustic Insulated
Vulcan Pipe and Duct Wrap Acoustic Insulation is the solution for noise control and Sound proofing of noisy pipes and duct works. Sound Seal Pipe and Duct Wrap or Lagging consists of a mass loaded noise barrier with reinforced foil facing on one side bonded to a 1" or 2" sound absorbing quilted fiberglass decoupler respectively.
Acoustical Lagging is wrapped around the outside of duct or pipe to reduce the radiated noise transmitting through the walls of the ductwork or piping. It is different from, and often used in conjunction with, a duct liner that is installed inside a duct to reduce noise exiting from downstream registers and vents.
Aluminum Jacketed
Aluminum-Jacketed Lag Pipe and Duct Wrap is an acoustic composite combining a noise barrier bonded to a rugged aluminum jacket. Designed specifically to meet varied acoustic performance needs, Aluminum-Jacked products offer versatile solutions for all pipe and duct noise control problems. They are available in smooth, corrugated and embossed jacket finishes over a 1.0 lb or 2.0 lb / sq loaded vinyl barrier offering aesthetics, protection and durability for exterior and chemical resistant applications.
Typically used in conjunction with a fiberglass or mineral wool decoupler, Aluminum-Jacketed Lag Pipe and Duct Wrap is a simple and effective solution when both sound blocking capability and extreme durability are requirements for a pipe or duct noise control project.